RT-ZI11 High Voltage Isolated Probe, 500 MHz Probe interface: BNC, 1 MΩ, isolated. Suitable for use with the ScopeRider RTH1002 (125-9462) and RTH1004 (125-9463) handheld digital oscilloscopes.

Rohde & Schwarz RTC1000 Series RTC1002 Oscilloscope The Rohde & Schwarz RTC1000 digital oscilloscope is designed with high vertical sensitivity and can perform multiple functions. This allows a bandwidth of 200MHz, memory depth of 2Mpts and sampling rate of 2Gsa/s. This oscilloscope also has a function generator for different types of signals having frequencies up to 50KHz. It has eight digital channels (MSO) that are optional and adaptable. It allows you to perform voltage measurements on analogue channels with two values simultaneously. This oscilloscope benefits you with different functions such as digital logic, protocol and frequency analysis on a single instrument. Features and Benefits • Low noise due to 8 bit analogue to digital converters• Fanless design for better performance• Electric field detection• Separate RTC-B1 logic probe suitable for all the RTC1000 oscilloscopes• Optional logical analyser Applications • Educational institutes• Used by service technicians• R&D troubleshooting• Production testing

The Rohde & Schwarz two-quadrant NGU201 provide up to 60 W of output power and sink power. The channels are floating, galvanically isolated and protected against overload and short circuits. The two-quadrant NGU201 source measure unit is a new member in the family of wireless communications test instruments, mainly designed to supply devices under test with extremely low sleep currents, such as Bluetooth® low energy devices. It is ideal for powering battery-operated devices due to its adjustable output impedance and fast impedance regulation. High-resolution touch screenSave and recall instrument settingsMinimum residual ripple and low noiseReadings with up to 6 digit resolutionVoltage priority and current priority modeHigh-capacitance modeHigh speed data acquisition (FastLog function)Protection functions to safeguard instrument and DUT

The Rohde & Schwarz oscilloscope utilize leading-edge technologies to achieve fast and accurate results. Custom technology and innovative features in oscilloscope quickly boost the understanding of circuit behaviour. Wide range of analysis functions accelerated by hardware for real-time performance, including math and measurements. Innovative dual-path protocol analysis ensures protocol packets decode and trigger correctly regardless of sample rate settings for the waveform acquisitions. Up to 5 Gsample/s sample rateStandard memory of 400 Mpoints per channel12-bit ADC at all sample rates18-bit architecture with HD modePrecise digital trigger

The Rohde & Schwarz four-quadrant NGU401 provide up to 60 W of output power and sink power. The channels are floating, galvanically isolated and protected against overload and short circuits. The four-quadrant NGU401 source measure unit is the semiconductor testing specialist for general-purpose applications that span many different industries and many different devices under test. It can act as bipolar power supply or bipolar electronic load. High-resolution touch screenSave and recall instrument settingsMinimum residual ripple and low noiseReadings with up to 6 digit resolutionVoltage priority and current priority modeHigh-capacitance modeHigh speed data acquisition (FastLog function)Protection functions to safeguard instrument and DUT

Rohde & Schwarz RTH1002 Scope Rider Handheld Digital Oscilloscope 60 MHz 2 Channels DMM Rohde & Schwarz Scope Rider RTH1002 offers the performance and capabilities of a laboratory oscilloscope together with the form factor and ruggedness of a battery-operated handheld device. Digital control signals can be analysed with the 8-bit logic interface that is isolated from the analog input channels. The protocol trigger and decode capabity is unprecedented in handheld oscilloscopes and provides direct display of decoded messages. If extra safety is required, the RTH1002 can be remotely controlled with the Web browser via wireless LAN, separating the measurement location from the place where the user controls the instrument. Features and Benefits 60 MHz with 5 Gsample/s sampling rate2 isolated channels with CAT IV 600 V / CAT III 1000 V rating10-bit ADC50000 waveforms per secondCapacitive touch and keypad operation5 integrated modes: lab performance oscilloscope; logic analyser; protocol analyser; data logger; digital multimeter (integral)IP51 housing meeting military environmental requirementsWireless LAN and Ethernet for web-based remote control and quick data accessBattery operates for more than 4 hours on one charge Areas of Application Safe debugging of embedded power suppliesFast debugging using specialised triggersWireless control can be used for increased operator safetyQuick and efficient troubleshooting Bandwidth Upgrades To preserve your oscilloscope investment as your requirements change, four bandwidth upgrades are avalable: 100MHz 200Mhz 350Mhz and 500Mhz (RS Stock No's. 125-9465, 125-9466, 125-9467, 125-9468 respectively).

Rohde & Schwarz Desktop Spectrum Analyser The Rohde and Schwarz FPC 1500 series spectrum analyser has a frequency range of 5KHz to 3GHz spectrum analyser. It has resolution bandwidth settings to 1Hz resolve finer spectral details. This has an input power supply voltage range from 100VAC to 240VAC. Features and Benefits • Network-efficient data transfer• Low power consumption• The ability to synchronize data captured across a network of analysers• Low cost to enable mass deployment• Sensitivity 30dBm• AM, FM modulation • Input impedance 50ohm • LAN, USB interface • WVGA display Applications • Research laboratory• Development laboratory• Repair and maintenance• Calibration laboratory• Automatic production test• General benchtop use Certifications • IEC 61010-1• EN 61010-1• UL 61010-1 listed• CAN/CSA-C22.2 No. 61010.1• ISO 9001• ISO14001• CE Approved • ETSI • FCC • IC Approval

The Rohde & Schwarz digital inputs and outputs can be used as trigger/inhibit inputs and control/fault outputs. The hardware of the NGU-K103 option is preinstalled. The function can be activated using a keycode. Easy operationMinimum residual ripple an low noiseReadings with up to 6 digit resolutionHigh speed data acquisition (FastLog function)

HA-Z220 Soft Carry Bag / RTH-Z4 Hard Shell Carry Case A choice of either a soft carry bag (125-9479) or a hard shell carrying case (125-9482) for the ScopeRider RTH1002 (125-9462) or RTH1004 (125-9463) multi-channel digital scopes.

Rohde & Schwarz Hameg Bench Power Supply / Interface options to be purchased separately The Rohde & Schwarz HMP series Hameg 188W bench power supply has three-channels, an output voltage rating of 32V and a current rating of 5A. These rugged instruments are ideal for a wide variety of requirements from educational and industrial applications. They offer high-efficiency with low residual ripple and other protection functions.Interface optionsDual interface (USB/LAN) R&S®HO732 - RS stock no. 174-2961Dual interface (RS-232/USB) R&S®HO720 - RS stock no. 250-2778IEEE-488 (GPIB) interface R&S®HO740 - RS stock no. 250-2779 Features and Benefits • High-resolution for settings and read back and up to 1mV and 0.1A,0.2A or 1.0A• Adjustable overload and overvoltage protection in the form of an electronic fuse or as otherwise called FuseLink for each channel• 3 channels available• Multiple interface options in the form of RS-232, USB, Ethernet and GPIB card, specially for remote control feature• Integrated free PC software, EasyArb for generating user defined waveforms• Isolated yet easily combinable channels for driving balanced circuitries• Easily programmable time-voltage and time-current feature for advanced serial and parallel operation• Simultaneous voltage, current and power display• Rack-mountable Applications • General laboratories• Education • Industrial applications• Production units• Workshops

Rohde & Schwarz RTC1000 Series RTC1002 Oscilloscope The Rohde & Schwarz RTC1000 digital oscilloscope is designed with high vertical sensitivity and can perform multiple functions. It allows a bandwidth of 50MHz, memory depth of 2Mpts and sampling rate of 2Gsa/s. This oscilloscope also has a function generator for different types of signals having frequencies up to 50KHz. It allows you to perform voltage measurements on analogue channels with two values simultaneously. It benefits you with different functions such as digital logic, protocol and frequency analysis on a single instrument. Features and Benefits • Low noise measurement due to analogue to digital converter• Fanless design for better performance• Separate RTC-B1 logic probe suitable for all the RTC1000 oscilloscopes• Logical analyser Applications • Educational institutes• Used by service technicians• R&D troubleshooting and testing

Serial Triggering and Decoding Options Protocols such as I2 C or SPI are frequently used for transferring control messages between integrated circuits. The R&S®ScopeRider is the first isolated handheld digital oscilloscope with trigger and decode capability for in-depth troubleshooting. Triggering on protocol events or data enables selective acquisition of relevant events, data and signals. Two serial triggering and decoding options are available for the ScopeRider RTH1002 (125-9462) and RTH1004 (125-9463) handheld digital oscilloscopes. I2C/SPI RTH-K1 Serial Triggering and Decoding - RS Stock No. 125-9473 UART/RS-232/RS-422/RS-485 RTH-K2 Serial Triggering and Decoding - RS Stock No. 125-9474